Test leak part number
14300 (5 mm alu)
14304 (pin VCO)
14308 (pin hose)
14312 (cyl. VCO)
High pressure
bar
psi
Please enter high pressure!
Maximum pressure is 40 bar (abs.) / 580 psi (abs.)!
Maximum pressure is 6 bar (abs.) / 87 psi (abs.)!
High pressure must be higher than low pressure!
Pressure setting
Gauge pressure (vs. atm.)
Absolute pressure (vs. vacuum)
Low pressure
Atmospheric pressure (air)
Vacuum (vs. 0)
Gas type
Helium 100%
Forming gas (95% nitrogen, 5% hydrogen)
10% helium + 90% nitrogen
Total leak rate
mbar l/s
sccm (ml/min)
atm cc/s
cm³/h
g/a (g/y)
Please enter leak rate!
Please use given insert format!
Leak rate too small at this pressure! Minimum leak rate is
Leak rate too big at this pressure! Maximum leak rate is
This leak can be made!
You must supply this code with your order:
Check